RGBW LED Controller – The Kit Control your blinky!!! Meet the RGBW LED Controller. Again.

http://thecustomgeek.com/kits/rgbw-led-controller/

RGBW LED Controller – The Kit

Control your blinky!!!

https://www.youtube.com/watch?v=t1cdyNiGz84

Meet the RGBW LED Controller. Again. 

This is version 3.1 and has new features and firmware! 

It is a LED controller that features an embedded ATmega328 with an Arduino bootloader for easy programming,

 4 channel LED control with dimming, 

5 or 12 volt output, IR receiver,

 XBee Adapter header, RS-232 or TTL serial I/O, 2 push buttons, 13 pin extensions for all unused pins (6 analog and 7 digital),

 power and channel LED indicators, and dual power input options. You can control 5 or 12 volt LED’s via serial with adjustments to the level of any channel with ramping to the desired level, 

rate of ramping, color cycle start and stop,

 rate of color cycle, length of stay on each color during cycle. Fans and motors can also be driven with ease. Be sure and also visit the

阿呀 四色led 4通道 led 控制器，ATmega328 處理器，arduino開機程序，可以簡單地寫程式

四個通道5或12v電壓閃爍輸出，紅外線接收器，XBee連接，RS232，TTL序列資料，兩個按鈕，13個外接腳(6個 類比，7 個數位輸入)

LED通道可以就受雙電壓選擇 5或12v

 顏色循環控制

 complete assembly tutorial! Power supplies, RGB and white LED strips, and XBee’s and XBee adapters are available at Adafruit!

商店

I now have FTDI Adapters in the store!

I now have an updated downloadable PDF manual with pictures! 

Remember, this is not a shield, it works standalone, without an Arduino!

Pick one up in the store!

Please ask all questions in the forums, thanks!

If you are looking for one already assembled, in a case and ready to go, you can find a retail version at http://rs232ledcontroller.com.